 |
Exterior & Interior Profile: Light Mesa Wave pattern, nominal 1/32 in. deep.
Core: Non-combustible, rigid mineral wool lamellas. Mineral wool fibers are oriented perpendicular to the panel faces for maximum structural strength.
R-Value: The core insulating properties are 3.61 "R" per inch.
Module Width: 42 in.
Panel Thickness: 4 in., 5 in., 6 in., 7 in., 8 in.
Lengths: 8’-0” to 40’-0”, variable by thickness. Contact Metl-Span for exact maximum length for each thickness.
Panel Weight, 26 Ga. Faces: 4" is 4.65#'s/SF, 5" is 5.49#'s/SF, 6" is 6.21#'s/SF, 7" is 6.92#'s/SF, 8" is 7.63#'s/SF.
Exterior Facings: Stucco embossed G-90 galvanized and/or aluminum-zinc coated steel in 26 Ga. and 24 Ga.
Interior Facings: Stucco embossed G-90 galvanized and/or aluminum-zinc coated steel in 26 Ga. and 24 Ga.
Finishes: Full-strength fluoropolymer PVF2 and siliconized polyester.
Colors: Twenty-one available exterior colors in full strength fluoropolymer PVF2; Polar White, Sandstone, Regal Gray, Desert Beige, Cool Sculpture Bronze, Aegean Blue, Brick Red, Cool Forest Green, Cool Marine Green, Cool Zinc Gray, Cool Bright Red, Cool Parchment, Tahoe Blue, Terra-Cotta, Regal Blue, Leaf Green, Hemlock Green, Jade Green, Cool Copper Penny, Cool Metallic Silver, and Cool Metallic Champagne. Three standard exterior colors in siliconized polyester; Polar White, Sandstone and Regal Gray. Interior color and coating is USDA compliant Igloo White.
Note: Prices may vary by color, gauge and quantity of metal.
Joint: Flush double tongue and groove interlock of the metal faces and machined integral spline of the mineral wool core.
Fastening: Both faces of the panel are attached at the connections of the panel ends to the support framing to conform to the requirements of the wall panel’s fire resistance rating.
FIRE RESISTIVE DATA
1. The finished panel in a four (4) inch thickness for one (1)-hour fire endurance rating, seven (7) inch thickness for two (2)-hour fire endurance rating, and eight (8) inch thickness for three (3)-hour fire endurance rating for nonbearing wall in accordance with UL 263 Fire Endurance Tests. Design No. U050 and ASTM E 119 Fire Test of Building Construction and Materials.
2. The finished panel in a six (6) inch thickness meets the requirements of a two (2)-hour fire endurance rating for nonbearing wall in accordance with ASTM E 119, Fire Test of Building Construction and Materials.
3. OPL listed for both 1-hour and 2-hour assembly rating. To view design listing go to Omega Point: http://www.opl.com/cgi-bin/listings.cgi . Go to Download or View Designs by Design Number.
NBW 344 - 1-hour listing
NBW 345 - 2-hour listing
4. Wall-framing support members and adjacent construction may require fire protection as specified by applicable building code. The customer is responsible for specifying the appropriate fire protection of these areas.
Notice: The information herein is intended to provide a general understanding of the ThermalSafe® panel and related fire protection requirements. For any specific application, the exact fire protection requirements must be obtained from the appropriate state/local building code and/or fire code authority.
|