CF Santa Fe^®Wall Panel

Metl-Span offers a CF Santa Fe^®embossed insulated metal wall panel that features a flat exterior profile with an embossed stucco texture to mirror the look of masonry stucco. The stucco textured metal panels provide buildings with a southwest desert appearance, making it the ideal panel choice to meet your stucco wall needs.

Stucco metal wall panels are easily installed, energy efficient, durable, and require little maintenance, contributing to cost efficiency throughout the entire process of choosing, installing, and using insulated metal wall panels.

Our Santa Fe^®panels service a variety of industries including Automotive, Healthcare, Manufacturing, and Self-Storage.

The table indicates PUR values. For PIR values, please refer to the data sheet available under the Literature tab.

Coverage Width	24″, 30″, 36″, 42″
Thermal Values – R-Value & U-Factor	*U-Factor (BTU/h-ft2Fahrenheit) Panel Width: 42″ 2″ = 0.059 2.5″ = 0.046 3″ = 0.038 4″ = 0.028 R-Value (hft2F/BTU)** Panel Width: 42″ 2″ = 17.5 2.5″ = 21.0 3″ = 26.2 4″ = 35.0
Exterior Face	G-90 galvanized or AZ-50 aluminum-zinc coated steel in 24 and 22 Ga.
Interior Face	G-90 galvanized or AZ-50 aluminum-zinc coated steel in 26, 24 and 22 Ga.
Finishes	Fluropon®, Fluropon® Premier, Fluropon® Classic, Flurothane®, Flurothane® Coastal, WeatherXL™, Igloo White Polyester
Joint	Offset double tongue-and-groove with extended metal shelf for positive face fastening.
Length	8′-0″ to 32′-0″ Horizontal 8′-0″ to 40′-0″ Vertical
Thickness	2″, 2 ¹/₂“, 2 ³/₄“*, 3″, 4”

*Available only from Nevada plant ** Based on ASTM C518, ASTM C1363 and thermal modeling

Metl-Span-Products_ProductDetail_Product-SantaFePanel2_Santa-Fe_Rt-Illustration.jpeg

Metl-Span-Products_ProductDetail_Product-SantaFePanel3_Santa-Fe_Joint-Illustration.jpeg

Metl-Span-Cliff Hanger-Commercial & Industrial Insulated Panels-Images-1.jpeg

Products_ProductDetail_Product-SantaFePanel4_Edies Crossing-011.jpeg

Metl-Span-Innovation First International-Roof Insulated Panels-Images-17.jpeg

JD1455 Metl Span Pocatella Lithia 47.jpeg

Design Features and Benefits

Panels provide design flexibility given their design
Strong and durable panels that require low maintenance
Energy efficient and environmentally friendly

Color Offerings

Explore Color Chart

1. Metallic paint finishes will exhibit color shift, shade variances, striations and longitudinal patterning that are inherent characteristics and are not a product defect or cause for rejection.

2. All Metl-Span colors are formulated to provide maximum energy-efficiency and solar reflectivity. All standard available Premium I and Premium II colors have been formulated for maximum solar reflectance.

3. Prices vary by color, gauge and quantity of metal. Please contact your Metl-Span representative for complete information.

4. All colors shown are approximate actual finish colors displayed as accurately as possible.

5. Light Stone – Tuff Cote^® does not match the Light Stone – Standard SP color offering.

Download Our Literature

Product Showcase

Santa Fe Data Sheet with PUR

Santa Fe Data Sheet with PIR

V6-X Span Clip

Metl-Span^® Santa Fe^® Wall Panel For Commercial & Industrial Buildings

2012 Master Format™ Section 07 42 13.19

CF Wall Panels with PUR Guide Specifications US Document

CF Wall Panels with PUR Guide Specifications US PDF

CF Wall Panels with PIR Guide Specifications US Document

CF Wall Panels with PIR Guide Specifications US PDF

All specifications and designs are subject to change without notice.

Load Span Tables

The Load Span Tables below are based on Allowable Stress Design (ASD). For loads calculated based on ASCE 7-10 (LRFD), please refer to section 2.4.1 of ASCE 7-10 for the applicable load combinations using Allowable Stress Design.

For FM Global Requirements, click here

US Santa Fe Wall Panels Load Charts

CF Panels with PIR Load Span Table

Commercial & Industrial Panels – Horizontal

Base Details
H-BE-01: C&I Horizontal Base Detail w/ Extended Trim Leg
H-BE-02: C&I Overhang Horizontal Base Detail w/ Drip Edge
H-EB-01: C&I Flush Horizontal Extruded Base Detail
Corner Details
H-CE-01: C&I Horizontal Outside Corner Detail
H-CE-02: C&I Horizontal Inside Corner Detail
H-CE-03: C&I Horizontal Formed Corner Detail
H-CE-04: C&I Horizontal Trimless Inside Corner Detail
H-EC-01: C&I Horizontal Extruded Outside Corner Detail
Eave, Parapet & Soffit Details
H-BE-03: C&I Horizontal Wall & Soffit Detail
Header, Jamb & Sill Details
H-EW-01: C&I Horizontal Offset Window Header Detail w/ Extrusion
H-EW-02: C&I Horizontal Offset Window Jamb Detail w/ Extrusion
H-EW-03: C&I Horizontal Extruded Window Sill Detail
H-WH-01: C&I Horizontal Window Header Detail
H-WJ-01: C&I Horizontal Window Jamb Detail
H-WS-01: C&I Horizontal Window Sill Detail
Joint Details
H-JT-01: C&I Horizontal Side Joint Detail
H-JT-02: C&I Horizontal Side Joint Detail
H-VJ-01:C&I Horizontal Vertical Joint with Gasket
H-VJ-02: C&I Horizontal Vertical Joint Detail with Wet Seal