CF Striated Wall Panel

Metl-Span’s CF Striated metal panels are an appealing alternative to typical flat wall panels. The exterior face is lightly profiled with narrow longitudinal striations, creating a subtle shadow effect while exhibiting a virtually flat appearance from a distance. The longitudinal Striated metal panel is an exceptional value, combining the aesthetics of a flat wall panel with the high insulation ratings of an insulated foam core.

The table indicates PUR values. For PIR values, please refer to the data sheet available under the Literature tab.

Coverage Width	24″*, 30″, 36″, 42″
Thermal Values – R-Value & U-Factor	*U-Factor (BTU/h-ft2Fahrenheit) Panel Width: 42″ 2″ = 0.059 2.5″ = 0.046 3″ = 0.039 4″ = 0.029 R-Value (hft2F/BTU)** Panel Width: 42″ 2″ = 17.5 2.5″ = 21.9 3″ = 26.2 4″ = 35.0
Exterior Face	G-90 galvanized or AZ-50 aluminum-zinc coated steel in 24 and 22 Ga.
Interior Face	G-90 galvanized or AZ-50 aluminum-zinc coated steel in 26, 24 and 22 Ga.
Finishes	Fluropon®, Fluropon® Premier, Fluropon® Classic, Flurothane®, Flurothane® Coastal, WeatherXL™, Igloo White Polyester
Joint	Offset double tongue-and-groove with extended metal shelf for positive face fastening.
Length	Non-Directional Embossed 8′-0″ to 32′-0″ Horizontal 8′-0″ to 40′-0″ for 24″, 30″, 36″ Vertical 8′-0″ to 32′-0″ for 42” Vertical Unembossed 8′-0″ to 16′-0″ Horizontal 8′-0″ to 16′-0″ Vertical
Thickness	2″, 2 ¹/₂“, 2 ³/₄“*, 3″, 4”

*Available only from Nevada plant **Based on ASTM C518, ASTM C1363 and thermal modeling, 35 degrees F core mean temp.

Metl-Span-Products_ProductDetail_Product-StriatedPanel3_Striated_Joint_02-Illustration.jpeg

Metl-Span-Products_ProductDetail_Product-StriatedPanel2_Striated_Rt_02-Illustration.jpeg

Metl-Span-Home2 Suites in Chicago-Commercial & Industrial Insulated Panels-Images 13.jpeg

Design Features and Benefits

Utilizes concealed clips and eliminates thermal short circuits
Easy and fast installation, with reduced construction labor costs
Create unlimited design concepts when used with other Metl-Span joint profiles
Develop unique building aesthetic
Achieve LEED status with outstanding R-values

Color Offerings

Explore Color Chart

1. Metallic paint finishes will exhibit color shift, shade variances, striations and longitudinal patterning that are inherent characteristics and are not a product defect or cause for rejection.

2. All Metl-Span colors are formulated to provide maximum energy-efficiency and solar reflectivity. All standard available Premium I and Premium II colors have been formulated for maximum solar reflectance.

3. Prices vary by color, gauge and quantity of metal. Please contact your Metl-Span representative for complete information.

4. All colors shown are approximate actual finish colors displayed as accurately as possible.

5. Light Stone – Tuff Cote^® does not match the Light Stone – Standard SP color offering.

Download Our Literature

Product Showcase

Striated Data Sheet with PUR

Striated Data Sheet with PIR

V6-X Span Clip

Metl-Span^® CF Striated Insulated Metal Panel For Commercial & Industrial Buildings

2012 Master Format™ Section 07 42 13.19

CF Wall Panels with PUR Guide Specifications US Document

CF Wall Panels with PUR Guide Specifications US PDF

CF Wall Panels with PIR Guide Specifications US Document

CF Wall Panels with PIR Guide Specifications US PDF

All specifications and designs are subject to change without notice.

Load Span Tables

The Load Span Table below is based on Allowable Stress Design (ASD). For loads calculated based on ASCE 7-10 (LRFD), please refer to section 2.4.1 of ASCE 7-10 for the applicable load combinations using Allowable Stress Design.

For FM Global Requirements, click here

US Striated Wall Panels Load Charts

CF Panels with PIR Load Span Table

Commercial & Industrial Panels – Horizontal

Base Details
H-BE-01: C&I Horizontal Base Detail w/ Extended Trim Leg
H-BE-02: C&I Overhang Horizontal Base Detail w/ Drip Edge
H-EB-01: C&I Flush Horizontal Extruded Base Detail
Corner Details
H-CE-01: C&I Horizontal Outside Corner Detail
H-CE-02: C&I Horizontal Inside Corner Detail
H-CE-03: C&I Horizontal Formed Corner Detail
H-CE-04: C&I Horizontal Trimless Inside Corner Detail
H-EC-01: C&I Horizontal Extruded Outside Corner Detail
Eave, Parapet & Soffit Details
H-BE-03: C&I Horizontal Wall & Soffit Detail
Header, Jamb & Sill Details
H-EW-01: C&I Horizontal Offset Window Header Detail w/ Extrusion
H-EW-02: C&I Horizontal Offset Window Jamb Detail w/ Extrusion
H-EW-03: C&I Horizontal Extruded Window Sill Detail
H-WH-01: C&I Horizontal Window Header Detail
H-WJ-01: C&I Horizontal Window Jamb Detail
H-WS-01: C&I Horizontal Window Sill Detail
Joint Details
H-JT-01: C&I Horizontal Side Joint Detail
H-JT-02: C&I Horizontal Side Joint Detail
H-VJ-01:C&I Horizontal Vertical Joint with Gasket
H-VJ-02: C&I Horizontal Vertical Joint Detail with Wet Seal