CFR

Metl-Span’s CFR is an insulated metal roof standing seam panel. This innovative, all-in-one composite insulated standing seam roof panel design combines durable interior and exterior faces with a foam core. The exterior profile is 1/8″ deep embossed planks and can be used on roof slopes as low as 1/2″: 12″.

The CFR composite roof panel’s unique advantage is that it comes with factory-cut panel notching and swaged ends, eliminating the need for additional time-consuming labor. Factory installed backer plates at the endlaps eliminate the need for pre-drilling for special fasteners. Its standing seam exterior face also provides unsurpassed weathertight performance, making it an unmatched roof system.

CFR panels can also function as roofing for coolers, freezers, food processing, and dry goods warehouses. This is the ideal roof panel of choice when temperature control and longevity are critical. Contact our representatives today for more information.

Coverage Width	36″, 42″
Thermal Values – R-Value & U-Factor	*U-Factor (BTU/h-ft2fahrenheit) Panel Width: 42″ 2″ = 0.065 2.5″ = 0.052 3″ = 0.044 4″ = 0.033 5″ = 0.027 6″ = 0.022 R-Value (hft2F/BTU)** Panel Width: 42″ 2″ = 17.5 2.5″ = 21.9 3″ = 26.2 4″ = 35.0 5″ = 43.7 6″ = 52.5
Exterior Face	G-90 galvanized or AZ-50 aluminum-zinc coated steel in 24 and 22 Ga.; or AZ-55 aluminum-zinc coated steel with a clear acrylic coating in 24 Ga.
Exterior Profile	2″ high standing seam with a Mesa profile between the seams, embossed
Interior Face	G-90 galvanized or AZ-50 aluminum-zinc coated steel in 26, 24 and 22 Ga.
Interior Profile	Mesa, nominal 1/8″, deep embossed or unembossed
Joint	Concealed clip mechanically seamed single lock standing seam at the exterior side joint. The interior side joint is a single tongue-and-groove interlock.
Core	Foamed-in-place, PIR Foam Core, PUR Foam Core, zero ozone depleting (zero ODP) Class 1 foam
Length	9′-6″ to 53′-0″; contact Metl-Span for custom length availability
Thickness	2″, 2 1/2″, 3″, 4″, 5″, 6″

* Based on ASTM C518, ASTM C1363 and thermal modeling
** Available only from Texas Plant

CFR Roof Seamer Rental

Metl-Span-Buena Park-Insulated Metal Panels-Image 1.jpeg

Metl-Span-Insulated Metal Panels-Light Mesa-Wurstfest-Image D5.jpeg

Metl-Span-Northhampton Forensics-image-20.jpeg

Color Offerings

Explore Color Chart

1. Metallic paint finishes will exhibit color shift, shade variances, striations and longitudinal patterning that are inherent characteristics and are not a product defect or cause for rejection.

2. All Metl-Span colors are formulated to provide maximum energy-efficiency and solar reflectivity. All standard available Premium I and Premium II colors have been formulated for maximum solar reflectance.

3. Prices vary by color, gauge and quantity of metal. Please contact your Metl-Span representative for complete information.

4. All colors shown are approximate actual finish colors displayed as accurately as possible.

5. Light Stone – Tuff Cote^® does not match the Light Stone – Standard SP color offering.

Download Our Literature

Product Showcase

Cold Storage Product Showcase

CFR Data Sheet with PIR

CFR Data Sheet with PUR

Metl-Span^® CFR Roof Panels For Commercial & Industrial Buildings

2012 Master Format™ Section 07 42 13.19

CFR Roof Panel with PIR Guide Specifications US Document

CFR Roof Panel with PIR Guide Specifications US PDF

CFR Roof Panel with PUR Guide Specifications US Document

CFR Roof Panel with PUR Guide Specifications US PDF

All specifications and designs are subject to change without notice.

Load Span Tables

The Load Span Tables below are based on Allowable Stress Design (ASD). For loads calculated based on ASCE 7-10 (LRFD), please refer to section 2.4.1 of ASCE 7-10 for the applicable load combinations using Allowable Stress Design.

For FM Global Requirements, click here

NOA Testing

CFR Load Chart USA

CFR Load Chart CANADA

CFR Load Chart for SNOW

CFR & Roofing Systems

CFR Complete Detail Book
CI-CFR: Complete Detail Book – PDF
CI-CFR: Complete Detail Book – PDF with Part Numbers

Commercial & Industrial Panels – Horizontal

Base Details
H-BE-01: C&I Horizontal Base Detail w/ Extended Trim Leg
H-BE-02: C&I Overhang Horizontal Base Detail w/ Drip Edge
H-EB-01: C&I Flush Horizontal Extruded Base Detail
Corner Details
H-CE-01: C&I Horizontal Outside Corner Detail
H-CE-02: C&I Horizontal Inside Corner Detail
H-CE-03: C&I Horizontal Formed Corner Detail
H-CE-04: C&I Horizontal Trimless Inside Corner Detail
H-EC-01: C&I Horizontal Extruded Outside Corner Detail
Eave, Parapet & Soffit Details
H-BE-03: C&I Horizontal Wall & Soffit Detail
Header, Jamb & Sill Details
H-EW-01: C&I Horizontal Offset Window Header Detail w/ Extrusion
H-EW-02: C&I Horizontal Offset Window Jamb Detail w/ Extrusion
H-EW-03: C&I Horizontal Extruded Window Sill Detail
H-WH-01: C&I Horizontal Window Header Detail
H-WJ-01: C&I Horizontal Window Jamb Detail
H-WS-01: C&I Horizontal Window Sill Detail
Joint Details
H-JT-01: C&I Horizontal Side Joint Detail
H-JT-02: C&I Horizontal Side Joint Detail
H-VJ-01:C&I Horizontal Vertical Joint with Gasket
H-VJ-02: C&I Horizontal Vertical Joint Detail with Wet Seal