Commercial & Industrial Products CF Mesa
Metl-Span-GVF-Mesa-Image.jpeg

CF Mesa

Metl-Span’s CF Mesa insulated metal panels are the total package when it comes to building envelope solutions. The low-profile corrugated panel of 1/8” rib not only offers thermal, vapor, and moisture barriers in a single component, but delivers high R-values to create an energy-efficient environment as well. The Mesa profile is designed with concealed clips to decrease thermal bridging and is well-equipped for exterior walls, interior walls, and ceiling applications. You can choose from an embossed or un-embossed profile with a face made of galvanized or aluminum-zinc-coated steel.

Similar to our CF Light Mesa panels, our CF Mesa insulated metal panels are used for used for commercial, institutional, and industrial buildings. By incorporating sustainability factors into their design, the Mesa profile adheres to green building standards where energy efficiency is paramount.

Mesa panels are also ideal for cold storage applications, including dry goods warehouses, cooler and freezer buildings, food processing facilities, and all temperature-controlled environments. Contact our representatives today to learn more!

The values in the table represent PUR values. For PIR, see data sheet.

Coverage Width30″*, 36″, 42″, 44″
Thermal Values – R-Value & U-FactorU-Factor(BTU/h-ft2*Fahrenheit)
2″ = 0.059
2.5″ = 0.046
3″ = 0.039
4″ = 0.029
5″ = 0.023
6″ = 0.019
8″ = 0.014

R-Value (h*ft2*F/BTU)
2″ = 17.5
2.5″ = 21.9
3″ = 26.2
4″ = 35.0
5″ = 43.7
6″ = 52.5
8″ = 70.0
Exterior FaceG-90 galvanized or AZ-50 aluminum-zinc coated steel in 26, 24 or 22 Ga.
Interior FaceG-90 galvanized or AZ-50 aluminum-zinc coated steel in 26, 24 or 22~ Ga.
FinishesFluropon, Fluropon Premier, Fluropon Classic, Flurothane, Flurothane Coastal, WeatherXL, Igloo White Polyester
JointOffset double tongue-and-groove with extended metal for positive face fastening
LengthNON-DIRECTIONAL EMBOSSED
8′-0″ to 32′-0″ Horizontal
8′-0″ to 52′-0″ Vertical

UNEMBOSSED
8′-0″ to 16′-0″ Horizontal
8′-0″ to 40′-0″ Vertical
Thickness2″, 2 ½”, 3″, 4″, 5″, 6″, 8″
** Based on ASTM C518, ASTM C1363 and thermal modeling
~ 22 Ga not available for stainless steel
Metl-Span-Mesa joint view_Illustration.jpeg
Mesa.jpeg
Metl-Span-Homepage_Module_FeaturedProducts_InsulatedMetalPanel_Mesa_Rt-Illustration.jpeg
Metl-Span-Homepage_Module_FeaturedProducts_InsulatedMetalPanel_Mesa_Rt-Illustration.jpeg
HamburgCasino11.jpeg
Metl-Span-Othello Pik and Pak Gas-Commercial & Industrial Insulated Panels-Images-7.jpeg
Metl-Span-Amazon Fulfillment Center-Insulated Metal Panels-Images-5.jpeg
Metl-Span-Mesa joint view_Illustration.jpeg
Mesa.jpeg
Metl-Span-Homepage_Module_FeaturedProducts_InsulatedMetalPanel_Mesa_Rt-Illustration.jpeg
Metl-Span-Homepage_Module_FeaturedProducts_InsulatedMetalPanel_Mesa_Rt-Illustration.jpeg
HamburgCasino11.jpeg
Metl-Span-Othello Pik and Pak Gas-Commercial & Industrial Insulated Panels-Images-7.jpeg
Metl-Span-Amazon Fulfillment Center-Insulated Metal Panels-Images-5.jpeg

Design Features and Benefits

  • Reliable, high-quality with foamed in place manufacturing
  • Easily washable low profile corrugated panels
  • Utilizes concealed clips and eliminates thermal short circuits
  • Easy and quick installation
  • Reduced labor costs
  • Interior and exterior applications

Colors

1.  Metallic paint finishes will exhibit color shift, shade variances, striations and longitudinal patterning that are inherent characteristics and are not a product defect or cause for rejection.

2.  All Metl-Span colors are formulated to provide maximum energy-efficiency and solar reflectivity.  All standard available Premium I and Premium II colors have been formulated for maximum solar reflectance.

3.  Prices vary by color, gauge and quantity of metal.  Please contact your Metl-Span representative for complete information.

4.  All colors shown are approximate actual finish colors displayed as accurately as possible.

5. Light Stone – Tuff Cote® does not match the Light Stone – Standard SP color offering.

Load Span Tables

The Load Span Tables below, excluding Partition Wall, are based on Allowable Stress Design (ASD). For loads calculated based on ASCE 7-10 (LRFD), please refer to section 2.4.1 of ASCE 7-10 for the applicable load combinations using Allowable Stress Design.

For FM Global Requirements, click here

US Mesa Wall Panels Load Charts

IMPORTANT NOTES:

Deflection caused by temperature differential induced thermal bow is not addressed in the above table and may result in allowable spans that are less than the spans listed above and may require the use of heavier 24 or 22 gage panel facings at added cost. Except for self-supporting the dead weight of the panel, partition wall panels are non-load bearing. Ceiling panels must be supported from the structure above or by an internal support structure. Panel skins must be captured at both ends of the panel by supporting members designed to support reaction pressures from a 5 psf interior pressure. CF-42 = 42″ wide. CF-45 = 44.5″ wide.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.





TESTING: CF Mesa Insulated Metal Wall Panel

Test/Approval Test MethodTest Title Results
Fire USASTM E84 Surface Burning Characteristics of Building
Materials
Flame spread ≤25, smoke developed ≤450
ASTM E119Fire Tests of Building Construction MaterialsOne hour non-load bearing rating with two layers of
Type X Gypsum
Vertical or horizontal installation
FM 4880Class 1 Fire Rating of Insulated Wall, Ceiling
and Roof Panels
Product approved Exterior wall requires FM 4881 approval
NFPA 259Test Method for Potential Heat of Building
Materials
Potential heat of foam plastic insulation contained in the assembly tested in accordance with NFPA 285-19
NFPA 285-19Evaluation of Fire Propagation Characteristics of Exterior
Non-Load Bearing Wall Assemblies
Panel assembly met the requirements of the
standard
NFPA 286Standard Methods of Fire Tests for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire GrowthTest specimen met the criteria of the IBC Section 803.1.2.1
Fire CanadaCAN/ULC S101Fire Endurance Tests of Building
Construction and Materials
One hour non-load bearing fire rating with two
layers of Type X Gypsum
CAN/ULC S101Fire Endurance Tests of Building
Construction and Materials
Meets 10 minute stay-in-place requirements
CAN/ULC S102Surface Burning Characteristics of Building
Materials and Assemblies
Meets the National Building Code of Canada
requirements
CAN/ULC S134Fire Test of Exterior Wall AssembliesComplies with the fire-spread and heat-flux
limitations required by the National Building Code
of Canada
CAN/ULC S138Fire Growth of Insulated Building Panels in a
Full-Scale Room Configuration
Met the criteria of the standard
Structural ASTM E72Standard Test Methods of Conducting Strength Tests of
Panels for Building Construction
See load chart
Thermal PerformanceASTM C518Steady-State Thermal Transmission
Properties by Means of the Heat-Flow Meter
Apparatus
K-Factor of 0.112 BTU.in/hr.ft2.°F at 35° F mean core
ASTM C1363Thermal Performance of Building Materials
and Envelope Assemblies
35°
2″ = .058
2.5″ = .045
3″ = .038
4″ = .028
5″ = .022
6″ = .019
8″ = 0.014
Air InfiltrationASTM E283Rate of Air Leakage Through Curtain Walls
Under Specified Pressure Differences
<0.04 cfm/ft2 air infiltration rate at static pressure
differential of 1.57 psf
Vertical or Horizontal installation
ASTM E2357Air Leakage of Air Barrier Assemblies<0.04 cfm/ft2 air infiltration rate at static pressure
differential of 1.57 psf, after 2,000 cycles at +/- 16.71 psf
Vertical or Horizontal installation; with and without
penetrations
Water InfiltrationASTM E331Water Penetration of Exterior Walls by Uniform
Static Air Pressure Differences
No uncontrolled leakage when tested to a static
pressure differential of 6.24 psf for 2 hours
Vertical or Horizontal installation

Related Projects

Have Questions About Our Products?

Please fill out the following information and an experienced sales representative will be in contact. We look forward to hearing from you!


View our Privacy Policy