Commercial & Industrial Products CF Santa Fe Wall Panel 
Metl-Span-LiveOak-Santa Fe Wall Panel-Image.jpeg

CF Santa Fe Wall Panel 

Metl-Span offers a CF Santa Fe embossed insulated metal wall panel that features a flat exterior profile with an embossed stucco texture to mirror the look of masonry stucco. The stucco textured metal panels provide buildings with a southwest desert appearance, making it the ideal panel choice to meet your stucco wall needs.

Stucco metal wall panels are easily installed, energy efficient, durable, and require little maintenance, contributing to cost efficiency throughout the entire process of choosing, installing, and using insulated metal wall panels.

Our Santa Fe panels service a variety of industries including Automotive, Healthcare, Manufacturing, and Self-Storage

Coverage Width24″, 30″, 36″, 42″
Thermal Values – R-Value & U-FactorU-Factor(BTU/h-ft2*fahrenheit)
Panel Width: 42″ at 35 degrees
2″ = 0.058
2.5″ = 0.045
3″ = 0.037
4″ = 0.028

R-Value (h*ft2*F/BTU)
Panel Width: 42″ at 35 degrees
2″ = 17.9
2.5″ = 22.4
3″ = 26.9
4″ = 35.9
Exterior FaceG-90 galvanized or AZ-50 aluminum-zinc coated steel in 24 and 22 Ga.
Interior FaceG-90 galvanized or AZ-50 aluminum-zinc coated steel in 26, 24 and 22 Ga
FinishesApplied Finishes, Igloo White
JointOffset double tongue-and-groove with extended metal shelf for positive face fastening
LengthPIR
8’-0” to 40’-0” Vertical

PUR
8′-0″ to 32′-0″ Horizontal
8′-0″ to 40′-0″ Vertical
Thickness2″, 2½″, 2¾″,  3″, 4″
** Based on ASTM C518, ASTM C1363 and thermal modeling

Design Features and Benefits

  • Panels provide design flexibility given their design 
  • Strong and durable panels that require low maintenance 
  • Energy efficient and environmentally friendly 

Colors

1.  Metallic paint finishes will exhibit color shift, shade variances, striations and longitudinal patterning that are inherent characteristics and are not a product defect or cause for rejection.

2.  All Metl-Span colors are formulated to provide maximum energy-efficiency and solar reflectivity.  All standard available Premium I and Premium II colors have been formulated for maximum solar reflectance.

3.  Prices vary by color, gauge and quantity of metal.  Please contact your Metl-Span representative for complete information.

4.  All colors shown are approximate actual finish colors displayed as accurately as possible.

5. Light Stone – Tuff Cote® does not match the Light Stone – Standard SP color offering.

Metl-Span® Santa Fe® Wall Panel For Commercial & Industrial Buildings

2012 Master Format™ Section 07 42 13.19

All specifications and designs are subject to change without notice.

Load Span Tables

The Load Span Tables below are based on Allowable Stress Design (ASD). For loads calculated based on ASCE 7-10 (LRFD), please refer to section 2.4.1 of ASCE 7-10 for the applicable load combinations using Allowable Stress Design.

For FM Global Requirements, click here

US Santa Fe Wall Panels Load Charts

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.





TESTING: CF Santa Fe Insulated Metal Wall Panel

Test/Approval Test MethodTest Title Results
Fire USASTM E84 Surface Burning Characteristics of Building
Materials
Flame spread ≤25, smoke developed ≤450
ASTM E119Fire Tests of Building Construction MaterialsOne hour non-load bearing rating with two layers of
Type X Gypsum
Vertical or horizontal installation
FM 4880Class 1 Fire Rating of Insulated Wall, Ceiling
and Roof Panels
Product approved Exterior wall requires FM 4881 approval
NFPA 259Test Method for Potential Heat of Building
Materials
Potential heat of foam plastic insulation contained in the assembly tested in accordance with NFPA 285-19
NFPA 285-19Evaluation of Fire Propagation Characteristics of Exterior
Non-Load Bearing Wall Assemblies
Panel assembly met the requirements of the
standard
NFPA 286Standard Methods of Fire Tests for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire GrowthTest specimen met the criteria of the IBC Section 803.1.2.1
Fire CanadaCAN/ULC S101Fire Endurance Tests of Building
Construction and Materials
One hour non-load bearing fire rating with two
layers of Type X Gypsum
CAN/ULC S101Fire Endurance Tests of Building
Construction and Materials
Meets 15 minute stay-in-place requirements
CAN/ULC S102Surface Burning Characteristics of Building
Materials and Assemblies
Meets the National Building Code of Canada
requirements
CAN/ULC S134Fire Test of Exterior Wall AssembliesComplies with the fire-spread and heat-flux
limitations required by the National Building Code
of Canada
CAN/ULC S138Fire Growth of Insulated Building Panels in a
Full-Scale Room Configuration
Met the criteria of the standard
Structural ASTM E72Standard Test Methods of Conducting Strength Tests of
Panels for Building Construction
See load chart
Thermal PerformanceASTM C518Steady-State Thermal Transmission
Properties by Means of the Heat-Flow Meter
Apparatus
K-Factor of 0.112 BTU.in/hr.ft2.°F at 35° F mean core
ASTM C1363Thermal Performance of Building Materials
and Envelope Assemblies
35°
2″ = .058
2.5″ = .045
3″ = .037
4″ = .028
Air InfiltrationASTM E283Rate of Air Leakage Through Curtain Walls
Under Specified Pressure Differences
<0.04 cfm/ft2 air infiltration rate at static pressure
differential of 1.57 psf
Vertical or Horizontal installation
ASTM E2357Air Leakage of Air Barrier Assemblies<0.04 cfm/ft2 air infiltration rate at static pressure
differential of 1.57 psf, after 2,000 cycles at +/- 16.71 psf
Vertical or Horizontal installation; with and without
penetrations
Water InfiltrationASTM E331Water Penetration of Exterior Walls by Uniform
Static Air Pressure Differences
No uncontrolled leakage when tested to a static
pressure differential of 6.24 psf for 2 hours
Vertical or Horizontal installation

Related Projects

Have Questions About Our Products?

Please fill out the following information and an experienced sales representative will be in contact. We look forward to hearing from you!


View our Privacy Policy